Gas Concentration Measuring-System (CH4, NH3, CO2) Upon Cow Feces in an Encased-Space Based on Arduino Uno
DOI:
https://doi.org/10.37891/kpej.v7i1.502Keywords:
Arduino uno, cow feces, MQ-2 sensor, MQ-4 sensor, MQ-135 sensorAbstract
The goal of this exploration is to fabricate an estimating instrument for perceiving Methane, Smelling salts, and Carbon Dioxide gas concentrations in cow feces within a confined space. The feasibility of gas concentration detection devices using MQ-2 sensors, MQ-4 sensors, and Arduino Uno-based MQ-135 sensors will also be tested. This research relates to physics, particularly instrument physics. The research will employ hardware design, software design, and testing methodologies. The gas used for testing was produced from 500 grams of cow feces through three treatments: no treatment, addition of 50 grams of activated charcoal, and addition of 50 milliliters of EM4. The tool validation test was conducted by three experts, and the typical worth acquired was 95.8%, classified as entirely achievable. The experiment yielded the highest concentrations of CH4, NH3, and CO2 gases at 11:30 AM (plus EM4), 03:00 AM (plus EM4), and 24:00 AM (without treatment), respectively, with readings of 9.49 ppm, 26.89 ppm, and 4.57 ppm.References
Agustin, E., Wahyu Amrulloh, D., & Regita Cahyani, S. (2018). Aplikasi Sensor Gas untuk Sistem Peringatan Dini Deteksi Gas Amoniak. Jurnal J-Innovation, 7(1), 1-6.
Amsar, A., Khairuman, K., & Marlina, M. (2020). Perancangan Alat Pendeteksi CO2 Menggunakan Sensor MQ-2 Berbasis Internet of Thing. Methomika Jurnal Manajemen Informatika dan Komputerisasi Akuntansi, 4(1), 73–79.
Arrahman, R., & Bella, C. (2022). Rancang Bangun Pintu Gerbang Otomatis Menggunakan Arduino Uno R3. In Portaldata.org, 2(2), 1-14.
Dari, G. U., Hamdani, D., & Setiawan, I. (2022). Rancang Bangun Alat Monitoring Gas Berbahaya (CO, CO2, CH4) pada Asap Rokok dalam Ruang Tertutup Berbasis Arduino Uno dan GSM SIM 900 A. Journal of Research and Technology, 8(Desember), 289–302.
Handriyono, R. E. Sutanto, J. E., & Putra, G. R. G. (2019). Studi Beban Emisi Gas Metan (CH4) dari Kegiatan Peternakan di Desa Gelengdowo Jombang. Jurnal Pengabdian Masyarakat Ipteks, 5(2), 119-123.
Kadir, A. (2016). Scratch for Arduino (S4A) untuk Mempelajari Elektronika dan Pemrograman. Yogyakarta: Penerbit Andi.
Kadir, A. (2017). Pemrograman Arduino dan Processing. Jakarta: PT Elex Media Komputindo.
Najamuddin, M. (2014). Strategi Mitigasi Emisi Gas Metan pada Budidaya Padi Sawah. Jurnal Agribisnis, 8(2), 171–188.
Notosudjono, D. (2021). Analisis Peningkatan Gas Metana (CH4) pada Digester Portabel dengan Kotoran Sapi sebagai Sumber Energi Biogas berbasis Internet of Things (IoT), Majalah Teknik, 22(1), 19–26.
Nugroho, L., Saptono, R., Hariyadi, A., Elektro, J. T., & Malang, N. (2021). Sistem Monitoring Kadar Gas Metana (CH4), Gas Amonia (NH3) dan Gas Karbon Dioksida (CO2) pada Tempat Pembuangan Sampah untuk Pencegahan Penyakit Ispa Berbasis Wireless Sensor Network. Jurnal Jaringan Telekomunikasi, 11(4), 220-227.
Nurhayati, I., & Widiawati, Y. (2017). Emisi Gas Rumah Kaca dari Peternakan di Pulau Jawa yang Dihitung dengan Metode Tier-1 IPCC (Greenhouse Gas Emissions from Livestock in Java Island Calculated by IPCC Tier-1 Method). Prosiding Seminar Nasional Teknologi Peternakan Dan Veteriner, 292–300.
Rahmanto, Y., Rifaini, A., Samsugi, S., & Riskiono, S. D. (2020). Sistem Monitoring pH Air pada Aquaponik Menggunakan Mikrokontroler Arduino Uno. Jurnal Teknologi dan Sistem Tertanam, 1(1), 23.
Rombang, I. A., Setyawan, L. B., & Dewantoro, G. (2022). Perancangan Prototipe Alat Deteksi Asap Rokok dengan Sistem Purifier Menggunakan Sensor MQ-135 dan MQ-2. Techné : Jurnal Ilmiah Elektroteknika, 21(1), 131–144.
Widodo, S., Amin, M. M., Sutrisman, A. & Putra, A. A., (2017). Rancang Bangun Alat Monitoring Kadar Udara Bersih dan Gas Berbahaya CO, CO2, dan CH4 di dalam Ruangan Berbasis Mikrokontroler. Jurnal Pseudocode, 4(2), 105-119.
Downloads
Published
How to Cite
Issue
Section
License
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal. Please also carefully read Kasuari: Physics Education Journal Posting Your Article Policy at http://journalfkipunipa.org/index.php/kpef/about
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities tacitly or explicitly of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with Kasuari: Physics Education Journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Whatsapp 
